New Xtreme Shock Series

Xtreme Non Adjustable Base Valve Shock Absorbers

The GXSB1 is a mono-tube, non-adjustable gas shock absorber.  It's available in 7"  and 9" stroke and any possible valving or split valving.  It has large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke. It also has a base valve that allows the shock to be effectively operated from zero to 300 PSI gauge pressure.



GX Piston Features.

Increased counter-pressure pre-load enabled.

Improved low speed characteristics.

Directional differential annular design.

Precision pressure control.

Decreased high speed restriction.

Improved high acceleration characteristics.

Improved flow.

Improved profile consistency.

Anodized aluminum.

Resistance to micro-fissure.

  • Proprietary anti-aeration two-piece closure.

  • Proprietary DGP design, keeps pressure low while supporting compression valve values.

  • Double checked low-speed valving design with .00004" precision components.

  • Proprietary EDO force velocity profiles.

  • Large 48mm bore for maximum control.

  • Largest 75mm built on gas reservoir.

  • Replaceable positive stainless steel no-drag scraper to keep any dirt and debris out.

  • Hollow chrome-moly shaft.
  • Low friction Teflon lined self lubricating 1/2 inch spherical bearing on both ends.
  • Proprietary Dynamic Gas Pressure Control, keeps pressure low while supporting compression valve values.
  • The finest high quality, high viscosity index, 100% Synthetic Shock absorber oil virtually 0 thermal expansion.
  • Has a base valve that allows the shock to be effectively operated from zero to 300 PSI gauge pressure.
  • Double checked  low-speed valving design.


  • Much more stability and control than standard shocks especially in choppy conditions.

  • Much more traction than standard shocks especially in slick conditions.

  • More driver feel which results in better feedback to adjust to ever changing track conditions.

  • The GXSB1 is completely rebuildable, and revalvable.

  • 3600 Coil Over Kit for GXS0,GD,GXS1,GXS2,GXS3,GXSB1,GXSB2 and GXSB3 Series Shocks is required for coil over applications with 2 1/2 springs.

  • 3675 Coil Over Kit for 5" Springs for GXS0,GD,GXS1,GXS2,GXS3,GXSB1,GXSB2 and GXSB3 Series shocks.
  • We highly recommend that you check with your chassis builder for their latest  recommendations as technology changes very frequently.

  • Some cars run a shock in front of the left rear to control the motion on acceleration and braking like a GXSB194-0 or GXSB195-0 for Sweeping corner tracks and GXSB196-0 or a GXSB198-3 for tighter corner tracks. And on slick tracks when hunting for more traction some cars use a dummy shock GXSB190. Also available in GXS0 and GXS1 series. Adjust your gas pressure accordingly any where from zero to 300 psi.

Series Extended Length Compressed Length  Travel
GXSSB1 - 7" 17 3/4 12 1/4  5 1/2 inch
GXSB1 - 7" 18 3/4 12 3/4 6 inch
GXSB1 - 9" 23 1/4 15 1/4 8 inch

 Xtreme Steel Shock Series


 Xtreme Aluminum Shock Series


 GD|GS0||GS1|GS3| G0|G1|G2|G3|G4|G5|G6|G7|G8 Shock Series.

GSB1|GSB2|GSB3|GB1|GB2|GB3 Base Valve Shock Series

Shock Parts and Accessories

GX Series Catalog - Now Available !

Genesis Racing Shocks Catalog

Genesis Offers  Camair Products

Genesis Racing Shocks Instructions Sheet

Shock Accessories

Genesis Racing Shocks Apparel

 Genesis Racing Shocks

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076


Fax 678-659-9457

e - mail -

Copyrighted 2006 - 2015